Pint .  .  .  .  . $35.00
          Quart .  .  .  . $50.00
          Gallon  .  .  . $55.00
           5 Gallon  .  $685.00             
 

 

  • 4 oz.covers @ 12 sq. ft.
  • Pint covers @ 50 sq. ft.
  • Quart covers @ 96 sq. ft.
  • Gallon covers 200 sq. ft.

    • COMPLETE DIRECTIONS FOR USE
    POR-15 is easier and less expensive to apply than epoxies, since it doesn’t require mixing: and it dries to a high-gloss or semi-gloss finish like paint, except that it cannot he scratched or peeled off. 
    It's consistency is approximately that of paint and it has very good spreadability (one quart covers 96 square feet)

    POR-15 Bulletin

    Industrial Information

    MSDS Sheet

    Using POR-15 on Concrete
    POR-15  chemically bonds to rusted steel to form a rock-hard, non-porous coating that won't crack chip, or peel. It works by isolating metal from moisture. Without moisture present, steel can't rust.

    Thin, covering coats are best ; POR-15 will accept all paints, including lacquer-based paints. Silver contains metal filler and should be used in badly rusted, pitted areas. It will fill in holes better than Black, Clear. or Grey.
     

    WHICH ONE DO I NEED?
    * GLOSS BLACK - use on frames, floorboards, under fenders, engine compartments, truck areas.
    * GREY - use for marine and industrial applications.    Works great as a concrete sealer and is impervious to fuels, battery acid, oils, etc., and when applied to concrete floors in shops or factories permits quick and easy clean up.
    * SILVER - contains metal filler and should be used on badly rusted steel to fill small holes and add strength to the metal.
    * CLEAR - dries to a perfect satin gloss, and is used on exterior surfaces before final painting and is excellent for "touch up" applications and may be used in all other areas as well.
    * SEMI-GLOSS* BLACK - perfect for areas that demand factory original semi-gloss black such as frames, chassis, firewalls, inner fenders, suspension and body undersides

    NOTE: Depending on the condition of the surface you are working on, we highly recommend using our preparation products MARINE CLEAN and METAL READY.
    If you have any questions please call, fax or e-mail us.

                                     

    Back