| QUESTIONS AND ANSWERS
A. No. You can use BLACKCOTE on bare steel and get
good protection, but it is not comparable to POR-15 Rust Preventive Paint,
which penetrates into the pores of the metal and chemically bonds with the
surface. Use BLACKCOTE as a topcoat OVER POR-15 to get
the best possible rust protection.
A. Absolutely not! Side-by-side panels were tested under
a variety of conditions, and the POR-15 coating was shown to be
clearly superior in preventing oxidation and corrosion. Try it yourself and
you'll see. Though BLACKCOTE will easily out-perform other coatings
on bare steel, it's greatest value and best use is as a topcoat over
POR-15 Rust Preventive Paint.
A. Very, very well. There are many occasions when you
want corrosion protection over a painted surface and you can't remove the
old paint.
Simply clean that
surface with Marine Clean to remove grease, wax, oil, silicon etc., scuff lightly, then topcoat with
BLACKCOTE. By the way, other colors (white, gray) will
be available in the near future.
A. Unfortunately, nothing is perfect in this world, not even BLACKCOTE! Like POR-15, it won't come off your hands if you let it dry; it will harden in the can if you leave the lid off and dip your brush directly in the can; it may occasionally have some tiny imperfections in its finish, so we can't call it a perfect cosmetic coating; and finally, it is certainly not inexpensive. It's very difficult to make, and the base resins are very expensive, but we've never let cost stop us from making the best coatings money can buy. BLACKCOTE is one of those coatings.
|